1 CO contact potential free 10 A/250 V AC. Incandescent lamps 2000 W. \nStandby loss 0.05–0.5 watt only.\nModular device for DIN-EN 60715 TH35 rail mounting. \n1 module = 18 mm wide, 58 mm deep.\nWith the patented Eltako Duplex technology (DX) the normally potential-free contacts can \nstill switch in zero passage when switching 230 V AC 50 Hz and therefore drastically reduce \nwear. Simply connect the neutral conductor to the terminal (N) and L to 15 (L) for this. \nThis gives an additional standby consumption of only 0.1 Watt.\nUniversal control voltage 8 to 230 V UC. Supply voltage same as the control voltage. Both functions and times are entered at the touch of a key and indicated digitally on an LC \ndisplay. Only two keys are required for this purpose.\nWhen setting the time all values can be entered within preset time ranges (0.1 to 9.9 or 1 to 99 seconds, minutes or hours). The longest possible setting is 99 hours. 600 settings are \npossible. The time setting is continuously displayed digitally.\nBy using a bistable relay coil power loss and heating is avoided even in the on mode.