The operator panel displays the message 80 “Replace maintenance kit” at required maintenance intervals. You must replace the fuser at this interval to maintain the print quality and reliability of the printer.\n\nCheck the 2 digit type code on the fuser, or check Device Information using the embedded web server or the menus page for a replacement part number.\n\nThere are multiple warnings to indicate that the fuser is nearing end of life and that a maintenance kit is required, including error codes 80.0x, 80.1x, and 80.2x. If you receive error code 80.3x, the fuser has reached its rated life and the printer stops until a maintenance kit is installed. You must install the correct Fuser Maintenance Kit for the type of fuser that is installed in the printer.